WE REPRESENT PRODUCTS FOR: PHARMACEUTICAL, COSMETIC, CHEMICAL AND FOOD INDUSTRY
LINEAR TUBE FILLER AND CLOSERThe linear tube filling and closing machine is small in size and very high performance, accessible from all sides to ensure easy control by the operator. A key feature is the ability to equip the “double head” to close / seal aluminum and laminated polyethylene pipes, all in one, without any additional modification. Ideal for installations in sterile environments and totally reliable over time. Models available for filling and closing tubes up to 400 pieces / min. |
ROTARY TUBE FILLER AND CLOSERThe high quality automatic rotary tube filling and sealing machine with a stainless steel frame and panels. It can be equipped to close / seal aluminum, polyethylene and laminated pipes. Ideal for installations in sterile environments and totally reliable over time. The rotary tube filling and sealing machine has models up to a mechanical speed of 90 pieces / min. |
HORIZONTAL CASE
|
The automatic cartoning machine is small in size and high quality with a stainless steel frame and panels. Models are available up to a mechanical speed of 200 pieces / min.
Stainless steel columns to operate in clean rooms (pharmaceutical and food industry). Coil lifters and rotators for loading into blisters. Barrel lifting columns with the possibility of rotating the barrel for unloading the product in compressing machines, etc. |
EQUIPMENT FOCUSED ON THE FLEXIBLE PACKAGING PROCESS
horizontal EQUIPMENTS
FINAL CUT series machines work both in automatic and intermittent mode, available either with simplex (1 production line) or duplex (2 production lines) version. These are suitable for the packaging of products such as:
|
VERTICAL EQUIPMENTS
The T-M300 is a multilane vertical packaging machine for stickpacks with heat-sealable film. With a motorized and intermittent drive, it shapes the sachet, doses the product and seals it by temperature in a stickpack form with three side of seal, cuts it horizontally and unloads it for its later handling in an automatic way, either via transfer or by means of an exit belt. |
|
|
The T-V series is a series of 4 weld flat envelope vertical packaging machine for liquid packaging.
BFS EQUIPMENTS
CYNOPAC
To package cyanoacrylate adhesive at high speed is even greater challenge, because even a tiny error can result into spillage of cyanoacrylate adhesive in the filling equipment. The adhesive can polymerise very quickly which could lead to disastrous and long break down. The handling and packaging difficulty has been taken care of in a simple and elegant way allowing a fully automatic packaging of cyanoacrylate adhesive at a speed up to 18.000 units per hour in a fully automatic equipment to make bottles starting from polymer granules, printing of product name and other information on these bottles, filling and sealing them all within one continuous automatic line with reliability of over 99,5%. ULTACLEAN
Conventional Blow Fill and Seal technology has now been in use since the last 40 years, and it is widely accepted technology proven to confer high sterility assurance levels. The advantage of this technology has been even recognized by EU GMP. Actually, in a revised Annex on the manufacturing of sterile medicinal products, a separate paragraph is dedicated to the Blow/Fill/Seal technology. It states: “Blow/Fill/Seal equipment used for sterile production which is fitted with an effective grade A air shower may be installed in at least a grade C environment, provided that grade A/B clothing is worn”. SECURJECT
Ageing population, global financial meltdown and increasing number of producers of generic drugs are all drivers to reduce the production cost. Several fold reduction in the cost can be achieved if these syringes can be made using Blow Fill Seal technology because:
|
MECAS
MECAS is an acronym for “Machine for Eurohead Cap Assembling and Sealing”. Multiple hot-runner injection units and multi-cavity mould allow sealing of caps, limiting line losses and optimizing production.
LVP
SYFPAC® LVP is specifically designed for containers which have a fill volume typically between 50 ml up to 2500 ml for aseptic primary packaging of: Intravenous solutions, solutions for irrigation, disinfectants, liquid soaps, solutions for continuous ambulatory peritoneal dialysis (CAPD), oral dosage, and antibiotics. Temperature of the liquid while filling should be typically between 4°C to 30°C. Modified systems can be developed to handle liquids at higher temperature. SVP
The SYFPAC® SVP machine was specifically designed for containers which have a filled volume between 0.25 ml up to 50 ml, for aseptic primary packaging of: Injectable solutions, ophthalmologic preparations, ear drops, preparations for aerosol therapy, respules, disinfectants, diluents, antibiotics and solutions for reconstitution. Special filling systems can be developed to package pastes, creams, thixotropic substances, suspensions, substances which set very quickly and substances which need protection from light and from atmospheric oxygen. Temperature of the liquid while filling should be typically between 4°C to 30°C. Modified systems can be developed to handle liquids at higher temperature. |
NJM packaging is part of the ProMach product brand in the Pharma Business Line, is a trusted AUTOMATED PACKAGING SYSTEMS INTEGRATOR AND SUPPORT RESOURCE.
FOR MORE THAN 100 YEARS, THEY HAVE OFFERED KNOWLEDGE AND EXPERIENCE, GUIDING their CUSTOMERS FROM THE EARLY PLANNING STAGES TO IMPLEMENTATION AND PRODUCTION.
|
Blister Packaging
Bundlers
Cappers & Retorquers
Cartoners
Case Packers
COTTONERS
Bottle Unscramblers
Track & Trace Systems
Tablet Counters
Print & Apply Labelers
Palletizers
Liquid Filling & Closing Systems
Line Integration
Labelers
Desiccant Dispensers
|
|
|
|
|
